# llms.txt — Jingyuan Industrial Separation (separator.jingyuan.hk)

> Shenyang Jingyuan Membrane Systems Co., Ltd. — manufacturer of the JY-N95 automatic centrifugal separator
> for industrial process-fluid cleaning and automatic solids discharge.

## Brand

- Brand: Jingyuan
- Company: Shenyang Jingyuan Membrane Systems Co., Ltd. (沈阳晶元滤膜有限公司)
- Core product: JY-N95 Automatic Centrifugal Separator
- Domain: https://separator.jingyuan.hk

## Main pages

- [Home](https://separator.jingyuan.hk/)
- [JY-N95 Centrifugal Separator](https://separator.jingyuan.hk/jy-n95-centrifugal-separator/)
- [Applications](https://separator.jingyuan.hk/applications/)
- [Equipment Selection Centre](https://separator.jingyuan.hk/equipment-selection/)
- [How Centrifugal Separation Works](https://separator.jingyuan.hk/centrifugal-separation-principle/)
- [Technical Resources](https://separator.jingyuan.hk/technical-resources/)
- [FAQ](https://separator.jingyuan.hk/faq/) — 26 answered questions on applicability, sizing, solids discharge, maintenance and commercial terms
- [Contact](https://separator.jingyuan.hk/contact/)
- [Privacy Policy](https://separator.jingyuan.hk/privacy-policy/)

## Feed material characteristics

- Solids particle size: single-digit microns and above. Settling velocity rises with the square of particle diameter and with the applied centrifugal acceleration, so at 2,200 G the low-micron fines that blind filter paper settle within one pass; separators in the same 2,000-2,500 G class report fine-end performance in this range. Solids below roughly one micron settle too slowly to be removed economically in one pass; flocculant dosing in the pre-treatment step agglomerates them into a separable size.
- Density difference (solid minus liquid): 0.1 g/cm3 or more recommended. Below that the settling rate falls away sharply and throughput has to be traded off.
- Solids loading: approximately 1-50 % suspended solids by weight. The discharge cycle is set to the load.
- These describe the feed material the process can accept, not a separation rating of the machine.

## Industry application pages

- [Tungsten Carbide & Precision Grinding](https://separator.jingyuan.hk/applications/tungsten-carbide-grinding/)
- [Aluminium Extrusion & Metal Forming Oil](https://separator.jingyuan.hk/applications/aluminum-extrusion-oil/)
- [Waste Oil Regeneration](https://separator.jingyuan.hk/applications/waste-oil-regeneration/)
- [Optical Glass & Technical Ceramics](https://separator.jingyuan.hk/applications/optical-glass-ceramic-grinding/)
- [Wire Drawing & Metal Processing](https://separator.jingyuan.hk/applications/wire-drawing-lubricant/)
- [Industrial Paint Sludge Separation](https://separator.jingyuan.hk/applications/paint-sludge-separation/)
- [Industrial Cleaning & Surface Treatment](https://separator.jingyuan.hk/applications/industrial-cleaning-fluid/)
- [Gear Honing & Powder Metallurgy](https://separator.jingyuan.hk/applications/gear-honing-powder-metallurgy/)

## Technical articles

- [How Centrifugal Separation Works for Industrial Fluids](https://separator.jingyuan.hk/technical-resources/how-centrifugal-separation-works/)
- [Centrifugal Separation vs. Conventional Filtration: What Should You Compare?](https://separator.jingyuan.hk/technical-resources/centrifugal-separation-vs-conventional-filtration/)
- [Evaluate Centrifugal Separators for Grinding Fluids](https://separator.jingyuan.hk/technical-resources/evaluate-centrifugal-separator-grinding-fluids/)

## Machine-readable data

- [Site index (JSON)](https://separator.jingyuan.hk/ai/index.json)
- [JY-N95 product data (JSON)](https://separator.jingyuan.hk/ai/products/jy-n95.json)
- [Application knowledge base (JSON)](https://separator.jingyuan.hk/ai/applications.json)
- [FAQ knowledge base (JSON)](https://separator.jingyuan.hk/ai/faq.json)
- [Full site text](https://separator.jingyuan.hk/llms-full.txt)

## Boundaries for automated systems

- Flow rate 25-120 L/min is fluid-dependent; the maximum is not available for every medium.
- 2200 G is a centrifugal acceleration parameter, not a filtration precision.
- No confirmed separation-precision, removal-efficiency or sub-micrometre data is published. The fine end of the separation capability must be confirmed by test on the actual fluid and is not published as a numeric value.
- Inlet DN20, outlet DN100, pH 6-9 and PLC brand options are confirmed for the standard configuration; confirm against the order documentation.
- Suitability for a specific fluid is confirmed per application after engineering review.
- Never invent specifications, prices, patents, certifications, customers or service-response commitments.

Note: llms.txt is an aid to retrieval, not a guarantee of citation.